Fire extinguishing and chemical protection boots (single, cotton)

Meet the GA6-2004 "Firefighter s fire protection boots" standard. Hand-carried type, used for firefighter s calf and foot protection, high-quality anti-aging rubber molding, multi-layer structure, composed of PVC surface, bottom, steel toe cap, puncture-proof, comfortable inner layer, cold-proof layer and other structures.

    Meet the GA6-2004 "Firefighter s fire protection boots" standard. Hand-carried type, used for firefighter s calf and foot protection, high-quality anti-aging rubber molding, multi-layer structure, composed of PVC surface, bottom, steel toe cap, puncture-proof, comfortable inner layer, cold-proof layer and other structures. Quality: ≤2. 8kg. The sole of the boot is a special anti-skid design, high temperature and low temperature resistance, anti-smashing, anti-skid, oil-proof, anti-piercing and anti-cutting, the main body of the boot is black with yellow, the toe is yellow, and the boot has a steel head for anti-smashing. The steel head is equipped with insulating rubber detection layers on both sides, breakdown voltage: ≥5000V, leakage current: ≤0.07mA; the boot sole has a steel midsole to prevent puncture and puncture resistance: ≥1700N; heat insulation performance: ≤2.5 ℃; anti-radiation heat paint penetration performance: ≤7℃; cold-resistant temperature minus 40 degrees, anti-cutting performance: the knife and the shoe surface are cut at an angle of 45 degrees at a speed of 100mm/s without being cut through. There are no wrinkles, trachoma, impurities, air bubbles, lumps, hard particles, and gloss scratches on the boot surface. The boot surface, the lining cloth, the inner bottom cloth and the anti-smashing inner toe cap liner are smooth, and there is no shelling phenomenon. There is no de-tooth springing, voiding, open glue, blooming, over-sulfur and under-sulfur phenomenon.