Firefighter rescue suit

Single-layer fabric is a double structure interwoven with aramid and flame-retardant viscose fiber dyed with liquid. The outer surface color should be orange-red, and the Pantone color number is PANTONE 17-1456TPX. The outer side of the fabric is moisture-resistant and the inner side Moisture wicking, anti-static, flame retardant, light weight, strong tensile strength and other properties.

    1. Single-layer fabric is a double structure interwoven with aramid and flame-retardant viscose fiber dyed with liquid. The outer surface color should be orange-red, and the Pantone color number is PANTONE 17-1456TPX. The outer surface of the fabric is moisture-resistant, The inner side has the properties of moisture wicking, anti-static, flame retardant, light weight, and strong tensile strength.
    2. Protection performance: The protection performance should meet the following requirements.
   (1) Flame-retardant performance: the fabric and the reinforcing materials of the shoulders, knees, buttocks, elbows and other parts are tested for flame-retardant performance after 25 washings. The damage length is not more than 50mm in the latitude and longitude, and the continuous burning time is 0s, and There should be no melting or dripping.
   (2) Surface moisture resistance: After the fabric is washed 5 times, the wetness level should not be less than 4.
   (3) Breaking strength: The fabric s warp and weft dry breaking strength should not be less than 850N.
    (4) Tear strength: the fabric warp and weft tear strength should not be less than 150N.
    (5) Thermal stability: After the thermal stability test at (180±5)℃, the dimensional change rate of the fabric and the reinforcing materials of the shoulders, knees, buttocks, elbows and other parts along the warp and weft directions should not exceed 10% , And there should be no obvious change on the surface of the sample.
    (6) Mass deviation per unit area: The mass deviation per unit area of ​​the fabric should not exceed ±5%.
     (7) Color fastness: The color fastness to water rubbing, color fastness to washing and color fastness to light should not be less than Grade 4.
    (8) Color difference: The color difference between the front collar and front body, sleeve and front body, bag and front body, left and right front body and other surface parts should not be less than level 4.
    (9) Stitch density: the light and dark lines of each part should not be less than 12 stitches per 3cm, and the overlock stitch should not be less than 9 stitches per 3cm.
    (10) Joint breaking strength: The joint breaking strength of the outer fabric shall not be less than 650 N.
     (11) Thermal stability of hard accessories: At a temperature of (180±5)℃, after 5 minutes, hard accessories should maintain their original functions.
    (12) Thermal stability of the sewing thread: under the condition of (180±5)℃, the sewing thread should not melt or burn after 5 minutes.
    (13) Anti-static performance: the charge amount of the upper and lower clothes should not be greater than 0.2μC.
     (14) Reflective marking tape performance: in line with GA10-2014 standard requirements.
    (15) Quality: In accordance with the provisions of 7.18 in the GA10-2014 standard, select L size (top size 175/92A, protective clothing bust 118, lower pants size 175/78A, protective clothing waist 92) for testing, protection The total mass of the service is not more than 1.5 kg.
     3. Accessories:
    (1) Zipper: The zipper used for the front placket of the jacket should be no less than No. 8, and the color must match the outer fabric; the zipper uses a flame-retardant zipper with an aramid base fabric, and relevant certifications should be provided.
    (2) Velcro: The appearance is flat, the hook surface is neatly arranged, the hook shape is intact, the hair surface is uniform, the thickness is uniform, there is no obvious unevenness, no obvious stains, uniform color, no obvious color difference, no coloration.
    (3) Reflective marking tape: adopts a 50mm width "yellow, silver and yellow" combination color breathable reflective marking tape.
     4. Style specifications:
    (1) Up and down split structure, shirt-style top with trousers design, the overlap between top and trousers should not be less than 150mm.
     (2) There is a "V"-shaped reflective marking belt on the front chest, a horizontal reflective marking belt on the back, and a surrounding reflective marking belt on the cuffs and feet.
    (3) The upper part of the collar is quilted along the arc of the collar, and the lower arc is horizontally quilted, which is convenient for turning down the collar; a small guard collar is set up, which can cover the neck and the placket when the collar is erected. Use zipper to close.
    (4) Two fixing belts for lighting lamps are set on the right chest of the jacket, and a concealed patch pocket is set, and the pocket cloth is fixed by two lines. There is a velcro above the reflective belt on the right chest, which can be pasted with reflective printing logo; the left arm is equipped with a shield-shaped velcro, which can be pasted with a shield-shaped armband.
    (5) The waist is designed with a rounded hem that is short in the front and long in the back. The front hem should be able to fit into the waist of the trousers, and the back hem should not slip out of the waist when bending over.
    (6) The lower trouser waist is equipped with a non-slip waist lining, and both sides of the trouser waist are equipped with elastic bands to tighten, and the trousers placket is closed with a trouser hook and zipper.
    (7) There are three-dimensional large pockets on both sides of the trouser legs, one open pocket on the right back hip, and a zipper closure. The trousers are fastened with hook-and-loop fasteners, making it easy to put on and take off the rescue boots.