Firefighter fire protective clothing

Firefighters fire-fighting protective clothing is used for body protection of firefighters when performing fire-fighting tasks. It has the properties of permanent flame-retardant, anti-static, waterproof and breathable, heat insulation, comfort, abrasion resistance, non-fading and strong marking.

    1. Firefighters fire-fighting protective clothing is used to protect the body of firefighters when they perform fire-fighting tasks. It has the properties of permanent flame-retardant, anti-static, waterproof and breathable, heat insulation, comfort, abrasion resistance, non-fading and strong marking.
    2. The firefighter s fire-fighting protective clothing is composed of an outer fabric, a thermal insulation, waterproof and breathable layer, and a three-layer structure. The overall thermal protection performance is TPP ≥ 31 (cal/c㎡).
   (1). The outer fabric is made of environmentally friendly aramid raw materials, the chlorine content is ≤87, and the heat-resistant protection performance:
    Thermal stability: After the outer fabric is treated at 260℃±5℃ for 5 minutes, there is no melting or dripping; change rate ≤1%; shrinkage rate ≤1. 5%; moisture resistance ≥3; color fastness , Washing and staining resistance (grade), water rubbing resistance (grade), light fastness (grade) ≥4 grade; durability, tearing strength, warp>270N, weft>190N; breaking strength, warp>1000N, weft ＞850N; Seam strength is greater than or equal to 1000N in warp direction, and greater than or equal to 925N in weft direction.

   (2). Heat insulation, waterproof and breathable layer: high-quality aramid spunlace felt base cloth covered with PTFE membrane, with good waterproof and breathable performance. After washing for 25 times, the hydrostatic pressure resistance> 50 kap; thermal stability performance after 260 ℃ ± 5 ℃, 5 minutes of treatment along the warp and weft direction dimensional change rate of 2%, there is no obvious change on the surface of the sample; oil repellency after washing 25 times After that, the oil repellent performance is level 3, and the water vapor transmission rate (g/㎡·24h)>5500.
   (3). Comfortable layer: permanent flame-retardant viscose fiber blended material, thermal stability change rate ≤ 3%, no obvious change on the surface of the sample.
   (4). Reflective marking tape: US 3M#9587 microporous reflective marking tape is adopted.
   (5). Hardware: keep the original functionality after 5 minutes of thermal stability test at 260℃±5℃.
   (6). Optional life-saving drag belt: the rate of change is 0 after the thermal stability test at 260℃±5℃ for 5 minutes; the breaking strength is ≥12700N.
   (7). The quality of a full set of clothing ≤ 2. 31kg.
   (8). Clothing style production requirements: the shoulders, elbows, trousers and knees of the top are reinforced with the same color fabric to increase the wear resistance and prolong the service life of the clothing. The top hem is designed with large left and right pockets, and the left front chest is designed with a three-dimensional pocket Intercom can be placed. The light and dark thread should not be less than 12 stitches per 3 cm, and the overlock stitch should be no less than 9 stitches per 3 cm.