Portable non-hurt unlock (destroyer)

The portable non-injury unlocker adopts advanced lock core destruction technology, which is practical in function and simple to operate. It can quickly and effectively destroy and remove the lock core in just a few minutes without damaging the anti-theft door body, and remove the lock tongue. Thereby opening the door.

    The portable non-injury unlocker adopts advanced lock core destruction technology, which has practical functions and simple operation. It can quickly and effectively destroy and remove the lock core in just a few minutes without damaging the anti-theft door body, and unlock the lock tongue. Thereby opening the door. The appliance can be used with auxiliary tools to open various common door locks.
    Cordless drill: forward and reverse directions can be switched; 2 speeds; used for drilling holes, removing obstacles in front of the lock cylinder and screwing in and out of special screws.
    Set screwdriver head:
    It is equipped with various screwdriver heads and a screwdriver head holder, which can be clamped on the electric drill to work. The screwdriver head can also be used on a T-wrench.
    Key 1. 2: After the lock core is pulled out, go deep into the lock and open the lock tongue.
    Special screw: used to remove the lock core after being screwed into the lock core.
    Sharp-nosed pliers \ Curved-nosed pliers: After the lock core is removed, it can be inserted into the lock hole to pick out debris.
    T-shaped wrench: equipped with various screwdriver heads as a manual powerful screwdriver. (Used when the electric drill cannot work)
    Hammer: Used in conjunction with a screwdriver to remove obstacles in front of the lock cylinder.
    Screwdriver: The screwdriver has a core-through structure. In addition to the function of the screwdriver itself, it can also be used to remove obstacles in front of the lock cylinder and toggle the bolt.
    Hole opener: used to remove the anti-drilling device in front of the lock cylinder.
    Drill bit, center drill \ rotary file: Φ4 drill bit is used to drill holes on the lock core.
    Rotary file: used to remove the anti-drilling piece of the lock.
    Backing plate: It is placed between the lock body and the lock core puller (lock core pull plate) to increase the supporting area and make the lock core pull out smoothly.
    Unlocker: It can be used to remove the lock core from the lock body with a special screw.
    Lubricant: Inject into the lock core hole before screwing in the screw to produce lubrication and make the screw screw in smoothly.
    Rechargeable battery: a spare battery for the rechargeable drill.
    The circular positioning sleeve is used in conjunction with the Φ20 hole opener to remove the anti-drilling device in front of the C-type anti-theft lock core.
    Charger: Charge the battery.
    Mini plate cutting machine: used to cut all kinds of anti-theft door steel plates.